Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell SmartFabric OS10 User Guide Release 10.5.3

PDF

add-path

Adds path-configuration support in peer-group level templates. This support applies for both IPv4 and IPv6 address families.

Syntax
add-path {both 2-64 | receive | send 2-64}
Parameters
  • both-Receives and sends multiple paths from peers.
  • receive-Receives multiple paths from peers.
  • send-Sends multiple paths to peers.
Default
Not configured
Command Mode
TEMPLATE ADDRESS FAMILY LEVEL
Usage Information

Configures the number of paths to be advertised or received for a specific template. This configuration is applied to all BGP peers when inheriting this template.

NOTE: Only the system administers (sysadmin) role is allowed to manage this configuration.
NOTE: The add-path configuration is not supported on the unnumbered peers when applied through the template.
Example
MAA-S4048T-X01-7445(config-router-template)# address-family ipv4 unicast
MAA-S4048T-X01-7445(config-router-bgp-template-af)# add-path both 4




MAA-S4048T-X01-7445(config-router-template)# address-family ipv6 unicast
MAA-S4048T-X01-7445(config-router-bgp-template-af)# add-path send 4




MAA-S4048T-X01-7445(config-router-template)# address-family ipv4 unicast
MAA-S4048T-X01-7445(config-router-bgp-template-af)# add-path receive




For BGP Unnumbered peers,

MAA-S4048T-X01-7445(config-router-bgp-200)# template abc
MAA-S4048T-X01-7445(config-router-template)# address-family ipv4 unicast
MAA-S4048T-X01-7445(config-router-bgp-template-af)# add-path both 4




MAA-S4048T-X01-7445(config-router-bgp-200)# neighbor interface ethernet 1/1/20

MAA-S4048T-X01-7445(config-router-neighbor)#inherit template abc inherit-type ibgp

% Error: Add-path not supported over unnumbered peer

Supported Releases
10.5.2.1 or Later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\