/connectivity/back-end/
The
back-end role context contains the configuration information required to connect to back-end storage arrays.
The back-end role does not have any associated properties. Note that only IP
port-groups have subnet contexts.
port-groups/ip-port-group-*/subnet/
The
back-end role context has subnets that allow you to configure routing to access targets with addresses that are not contained by
prefix.
The following is a description of the subnet attributes:
- gateway - The address of the gateway associated with this subnet.
- mtu - The maximum transfer unit for this subnet.
- prefix - The prefix and mask for this subnet.
- remote-subnets - Prefixes of the remote networks reachable from this subnet.
Refer to
subnets context for information on modifying or clearing these attributes.