Parameter | Settings | Description |
---|---|---|
USB Mass Storage Driver Support | Disabled, Enabled | Enable/disable USB mass storage driver support. |
USB hardware delays and time-outs: | ||
USB transfer time-out | 1 sec, 5 sec, 10 sec, 20 sec | The time-out value for Control, Bulk, and Interrupt transfers. |
Device reset time-out | 10 sec, 20 sec, 30 sec, 40 sec | USB mass storage device start unit command time-out. |
Device power-up delay | Auto, Manual | Maximum time that the device takes to properly report itself to the host controller. Auto uses the default value. For a root port, it is 100 ms; and for a hub port, the delay is taken from the hub descriptor. |