- Notes, cautions, and warnings
- Overview
- System views
- Installing your Edge Gateway
- Safety and regulatory information
- Setting up your Edge Gateway
- Activating your mobile broadband service
- Mounting your Edge Gateway
- Mounting the Edge Gateway using the standard-mount bracket
- Mounting the Edge Gateway using quick-mount bracket
- Attaching the cable control bars to the standard-mount bracket
- Mounting the Edge Gateway on a DIN rail using the DIN-rail bracket
- Mounting the Edge Gateway using the perpendicular mount
- Mounting the Edge Gateway using a VESA mount
- Setting up the ZigBee dongle
- Setting up the operating system
- Windows 10 IoT Enterprise LTSB 2016
- Ubuntu Core 16
- Overview
- Boot up and log in – Remote system configuration
- Boot up and log in – Static IP system configuration
- Updating operating system and applications
- Additional Ubuntu commands
- Ubuntu Network Manager
- Security
- Watchdog Timer (WDT)
- Cloud LED On/Off
- Global Positioning Systems (GPS)
- Snappy auto update/Autopilot
- Accessing Snappy Store/Snapweb
- CAN module
- Sensors
- Ignition Pin
- System Power Management
- Restoring Ubuntu Core 16
- Flashing a new OS image
- Ubuntu Server
- Overview
- Login to the Edge Gateway using Ethernet Port 1
- Installing or configuring Dynamic Host Configuration Protocol (DHCP) daemon
- Login to the Edge Gateway using Ethernet Port 2
- Ubuntu Server driver information
- Firmware management on Ubuntu Server
- Configure Watchdog Timer (WDT)
- Trusted Platform Module (TPM)
- Cloud LED On/Off
- Advanced Linux Sound Architecture (ALSA)
- Global Positioning Systems (GPS)
- ZigBee
- Sensors
- Ignition Pin
- System Power Management
- Ubuntu Network Manager
- Restoring Ubuntu Server
- Creating the recovery USB flash drive
- CAN module
- Accessing and updating BIOS
- References
- Appendix
- Contacting Dell
Dell Edge Gateway 3002 Installation and Operation Manual
Right view
| Features | ||
|---|---|---|
| 1 | CANbus port | Enables the CANbus connection. |
| 2 | USB 2.0 port 1 | Connect a USB enabled device. Provides data transfer speeds up to 480 Mbps. |
| 3 | Ethernet port two (Non-PoE) | Connect
an Ethernet (RJ45) cable for network access. Provides data transfer
speeds up to 10/100 Mbps. For information on how to configure Ethernet settings, such as duplex configuration, see: |
| 1 USB power is limited to 0.4 A/2 W. | ||
| Features | ||
|---|---|---|
| 1 | GND | Ground |
| 2 | CAN-H | High-level CANbus line |
| 3 | CAN-L | Low-level CANbus line |
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\