Encryption Recovery v11.9

Perform a Recovery

1. Using the bootable media created earlier, boot to that media on a recovery system or on the device with the drive you are attempting to recover. A WinPE environment opens with the recovery application.
   NOTE:Disable SecureBoot before the recovery process. When finished, re-enable SecureBoot.

   

2. Choose option one and press Enter.
3. Select Browse, locate the recovery file, and then click Open.

   

4. Click OK.

   • 

5. Recovery is now completed. Press any key to return to the menu.

   

6. Press r to reboot the computer.
   NOTE:

   Be sure to remove any USB or CD\DVD media that was used to boot the computer. Failure to do this may result in booting back into the recovery environment.

7. After the computer reboots, you should have a fully functioning computer. If problems persist, contact Dell ProSupport.