You can set the non-critical threshold values for voltage, current,
cooling and temperature probes.
To set the non-critical
threshold values for a probe, type:
cctk advsm --set=<
cctk option name>:<upper non critical threshold value>
-
NOTE: Here,
cctk option name
is the component for which you want
to set the non-critical threshold values in a probe. You can obtain
the
cctk option name
for a probe using the
report command.
For example, to set
the non-critical threshold values for a voltage probe, type:
cctk advsm --set=voltage_1:10
For example, to set only the upper non-critical threshold
value for a current probe, type:
cctk advsm --set=current_1:100
For example, to set the non-critical threshold
values for a cooling probe, type:
cctk advsm --set=cd_1:10
For example, to set only the upper non-critical
threshold value for a temperature probe, type:
cctk advsm --set=temperature_1:100
If the system has a setup password, while setting the non-critical
threshold values specify the setup password and set the non-critical
threshold values as:
cctk advsm --set=<
option name>:<
upper non critical threshold value> --valsetuppwd= <
setup password>
For example, to
set the non-critical threshold values for a voltage probe on a system
with a setup password, type:
cctk advsm --set=voltage_1:55 --valsetuppwd = <
setup password>
For example, to
set the non-critical threshold values for a current probe on a system
with a setup password, type:
cctk advsm --set=current_1:55 --valsetuppwd = <
setup password>
For example, to
set the non-critical threshold values for a cooling probe on a system
with a setup password, type:
cctk advsm --set=cd_1:55 --valsetuppwd = <
setup password>
For example, to
set the non-critical threshold values for a temperature probe on a
system with a setup password, type:
cctk advsm --set=temperature_1:55 --valsetuppwd = <
setup password>
If the system
has a system password and no setup password, while setting the non-critical
threshold values specify the system password and set the non-critical
threshold values as:
cctk advsm --set=<
cctk option name>:<
upper non critical threshold value> --valsyspwd= <
system password>
For example, to set the non-critical threshold values
for a voltage probe on a system with a system password and no setup
password, type:
cctk advsm --set=voltage_1:10 --valsyspwd = <
system password>
For example, to
set the non-critical threshold values for a current probe on a system
with a system password and no setup password, type:
cctk advsm --set=current_1:10 --valsyspwd = <
system password>
For example, to set the non-critical
threshold values for a cooling probe on a system with a system password
and no setup password, type:
cctk advsm --set=cd_1:10 --valsyspwd = <
system password>
For example,
to set the non-critical threshold values for a temperature probe on
a system with a system password and no setup password, type:
cctk advsm --set=temperature_1:10 --valsyspwd = <
system password>