Configuring
Multiple CMCs through RACADM Using Chassis Configuration Profiles
By using chassis
configuration profiles, you can export the chassis configuration profiles
as an XML file and import it to another chassis.
Use
RACADM get command for export operation
and set command for import operation.You
can export chassis profiles (XML files) from CMC to the network share
or to a local management station and import chassis profiles (XML
files) from the network share or from a local management station.
NOTE By default,
the export is done as clone type. You can use the –—clone to get the clone type profile in XML file.
The import and export operation to and from the network share can
be done through local RACADM as well as remote RACADM. Whereas, the
import and export operation to and from the local management can
be done only through remote RACADM interface.
Exporting Chassis
Configuration profiles
You can export chassis configuration profiles to network share by
using the get command.
To export the chassis configuration profiles as clone.xml file to CIFS network share by using get command, type the following:
racadm get –f clone.xml –t xml –l //xx.xx.xx.xx/PATH –u USERNAME –p PASSWORDCMC
To export the chassis configuration profiles as clone.xml file to NFS network share by using get command, type the following:
racadm get –f clone.xml –t xml –l xx.xx.xx.xx:/PATH
You can export chassis configuration profiles
to network share through a remote RACADM interface.
To export the chassis configuration profiles as clone.xml
file to CIFS network share, type the following:
racadm –r xx.xx.xx.xx –u USERNAMECMC –p PASSWORDCMC get –f clone.xml –t xml –l //xx.xx.xx.xx/PATH –u USERNAME –p PASSWORD
To export the chassis configuration profiles as clone.xml
file to NFS network share, type the following:
racadm –r xx.xx.xx.xx –u USERNAMECMC –p PASSWORDCMC get –f clone.xml –t xml –l xx.xx.xx.xx:/PATH
you can export chassis configuration profiles
to local management station through remote RACADM interface.
To export the chassis configuration profiles as clone.xml
file, type the following:
racadm –r xx.xx.xx.xx –u USERNAMECMC –p PASSWORDCMC get –f clone.xml –t xml
Importing Chassis
Configuration profiles
You can import chassis configuration profiles from network share
to another chassis by using the set command.
To import the chassis configuration profiles from
CIFS network share, type the following:
racadm set –f clone.xml –t xml –l //xx.xx.xx.xx/PATH –u USERNAME –p PASSWORDCMC
To import the chassis configuration profiles from
NFS network share, type the following:
racadm set –f clone.xml –t xml –l xx.xx.xx.xx:/PATH
You can import chassis configuration profiles
from network share through remote RACADM interface.
To import the chassis configuration profiles from
CIFS network share, type the following:
racadm –r xx.xx.xx.xx –u USERNAMECMC –p PASSWORDCMC set –f clone.xml –t xml –l //xx.xx.xx.xx/PATH –u USERNAME –p PASSWORD
To import the chassis configuration profiles from
NFS network share, type the following:
racadm –r xx.xx.xx.xx –u USERNAMECMC –p PASSWORDCMC set –f clone.xml –t xml –l xx.xx.xx.xx:/PATH
You can import chassis configuration profiles
from local management station through remote RACADM interface.
To export the chassis configuration profiles as clone.xml
file, type the following:
racadm –r xx.xx.xx.xx –u USERNAMECMC –p PASSWORDCMC set –f clone.xml –t xml
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\