PowerProtect DD9400 System Installation and Storage Expansion Guide

Install the enclosure into the rack

1. Pull the middle rails out of the rack until they lock into place. Ensure that the ball bearing retainer is located at the front of the middle rail.
2. Lift the enclosure and slide it onto the rails.
   CAUTION:A mechanical lift is required to safely lift the enclosure. Ensure that the enclosure remains level while inserting it in the rack.

   
   

   

   
   

3. When hit a stop, pull the blue release tab on the inner rails.
4. Secure the enclosure to the rack using the thumbscrews on the rack mount ears on both sides of the enclosure.