NOTE Do not extend more than one shelf at a time. Extending more than one shelf at a time can cause the rack to tip over, which will damage the equipment and may injure personnel.
About this task
To access the internal components, you must release and pull the shelf out of the cabinet. The shelf slides out of the cabinet far enough for you to access its internal components and then locks on the rails in the service position so that you cannot pull it out any farther. The chassis is freed from the cabinet by removing captive shoulder screws which attach the chassis to the cabinet.
Steps
Unscrew the attaching screws from the NEMA channel.
Unscrew the shoulder-screws until they are free from the cabinet. Using the orange shelf latch handles, pull the slowly pull shelf completely out the cabinet.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\