- Notes, cautions, and warnings
- Introduction and Preparation
- Install the System in the Rack
- Install the Disk Shelves in the Rack
- Connect Cables and Power On
- Configure System for Use
- Add Storage Capacity
Rail Pins from kit | Part Number and Description | Suggested Use |
---|---|---|
036-028-018
Custom screw, M4 x 10MM (Quantity: 4 per kit) | Used for any third-party rack. Can be used in racks with threaded holes. | |
036-028-016
3.8MM Alignment Pin (Quantity: 8 per kit) | Used in racks that have M5, #10, or #12 threaded holes. | |
036-028-017
4.8MM Alignment Pin (Quantity: 8 per kit) | Used in racks that have M6 threaded holes. |