- Notes, cautions, and warnings
- Introduction and Preparation
- Install the System in the Rack
- Install the Disk Shelves in the Rack
- Connect Cables and Power On
- Configure System for Use
- Add Storage Capacity
The drive slot/locations are marked on the chassis 0-59, but the OS software still references the slots as 1-60. It is important to identify the proper drive between the location called out in the FRU, and the location as specified in the software.
# disk show state Enclosure Disk Row(disk-id) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 -------------- ---------------------------------------------- 1 . . . . 2 |--------|--------|--------|--------| | Pack 1 | Pack 2 | Pack 3 | Pack 4 | E(49-60) |. . s |- - - |- - - |- - - | D(37-48) |. . . |- - - |- - - |- - - | C(25-36) |. . . |- - - |- - - |- - - | B(13-24) |. . . |- - - |- - - |- - - | A( 1-12) |. . . |- - - |- - - |- - - | |--------|--------|--------|--------| -------------- ---------------------------------------------- Legend State Count ------ ------------------- ----- . In Use Disks 18 s Spare Disks 1 U Unknown Disks 0 - Not Installed Disks 45 ------ ------------------- ----- Total 19 disks