Deploying the
Cyber Recovery software to
Microsoft Azure
Use the
Azure Resource Manager (ARM) template to deploy the
Cyber Recovery software to the
Microsoft Azure cloud.
Prerequisites
All the prerequisites that are described in Chapter 2 are met.
The ARM template (CR_ARM.json) and the parameters template (CR_ARM_param.json) have been acquired.
About this task
Performing the following steps takes approximately 15 minutes.
Steps
Log in to the Azure portal.
In the
Search field, type
deploy custom template and select the result.
In the
Custom deployment pane, click
Build your own template in the editor.
The
Edit template pane opens.
Click
Load file, select the
CR_ARM.json file, and then click
Open.
The
CR_ARM.json file contents are copied into the
Edit template pane.
Click
Save.
Click
Edit Parameters, click
Load file, select the
CR_ARM_param.json file, and then click
Open.
Click
Save.
The
Custom deployment pane displays the fields that you must complete for the deployment.
For the
Resource group
field, click
Create new, type a meaningful name in the pop-up pane, and click
OK.
Complete the parameter fields that are described in the following table:
Table 1. Parameter fields for creating a deploymentThe table lists the fields in the CloudFormation template that are used to create the deployment.
Fields
Description
Region
Select a region in which the deployment will reside.
Resource Prefix
Type a prefix for the resources in the resource group. This prefix is attached to all the resources that are deployed.
Address spaces:
Vnet Address Space
Jump Host Subnet Address Space
CR DDVE Subnet Address Space
Data Domain Mgmt Ip Address
Data Domain Replication Ip Address
PPCR Mgmt Ip Address
Jump Host Ip Address
Production Client Ip Address
Type the CIDR range for each address space.
DD sizing:
Os Disk Type
Data Domain Virtual Machine Size
Number of Metadata Disks
Select the sizing information of the DDVE system.
Usernames and passwords:
Data Domain Username
Data Domain System Password
Jump Host Admin Username
Jump Host Admin Password
CR Mgmt Host Admin Username
CR Mgmt Host Admin Password
Type the appropriate usernames and passwords.
NOTE: For the Jump Host password, ensure that the password is a minimum of 14 characters, otherwise you cannot log in when you access the jump host.
Click
Next: Review + create.
The software validates the inputs and displays a
Validation Passed message.
Click
Create at the bottom of the pane to start the deployment.
The deployment is initialized and submitted. The
Deployment is in progress message is displayed and components are listed as they are deployed. Then, the message changes to indicate that the deployment is completed.
Click
Go to resource group to see all the available resources.
The list includes the
VM, the jump host, the DDVE, and so on.
Next steps
Because the jump host is a CIS-hardened Windows host, temporarily enable file transfers over RDP. Then install a browser.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\