For information about how to install the
Cyber Recovery software, see the
Dell PowerProtect Cyber Recovery Installation Guide.
Steps
Install the same version of the
Cyber Recovery software that was running before the disaster occurred.
If you were running an installation that included patch updates, install the patch updates also.
NOTE We recommend that when you reinstall the
Cyber Recovery software for this procedure that you use the same password that was used in the previous installation for the crso, the MongoDB database, and the lockbox. This same password makes it easier to complete the recovery procedure. We also recommend that you use the same installation locations.
When the installation is complete, start the UI and validate that the configuration is empty.
Close the UI.
Start the
Cyber Recovery software restore procedure:
Run the
crsetup.sh setup script:
crsetup.sh --recover
Type
y to continue:
Do you want to continue [y/n]:
Type
y to confirm and continue:
Are you REALLY sure you want to continue [y/n]:
Type the full path to the
Cyber Recovery backup tar package location, for example: