This feature allows you to schedule automatic startup from hibernate or turn off state at the time that is specified in
AutoOnHr and
AutoOnMn.
NOTE:AutoOn capabilities work only for a system running on AC power. This feature does not work if the system is running on battery power.
NOTE:AutoOn feature is not supported for ARM64 systems.
Select one of the following options:
Disabled — To disable the AutoOn capabilities.
Everyday — To enable the AutoOn capabilities for every day.
Weekdays — To enable the AutoOn capabilities on weekdays (Monday to Friday).
SelectDays — To enable or disable the AutoOn capabilities on selected days. If you select this option, the following attributes are available in the PowerManagement category:
AutoOnMon
— To enable or disable the AutoOn capabilities on Mondays.
AutoOnTue — To enable or disable the AutoOn capabilities on Tuesdays.
AutoOnWed — To enable or disable the AutoOn capabilities on Wednesdays.
AutoOnThu — To enable or disable the AutoOn capabilities on Thursdays.
AutoOnFri — To enable or disable the AutoOn capabilities on Fridays.
AutoOnSat — To enable or disable the AutoOn capabilities on Saturdays.
AutoOnSun — To enable or disable the AutoOn capabilities on Sundays.
You can enable or disable individual days by setting AutoOnSun -enabled, and AutoOnMon -disabled, so on
Configure
AutoOnHr and
AutoOnMn attributes in order to set the time for the Auto-On function.
AutoOnHr — To set the hour at which you want the system to turn on automatically, provide the value ranging from 0-23. To set the time 11:59 p.m., provide the value as 23.
AutoOnMn — To set the minute at which you want the system to turn on automatically, provide the value ranging from 0-59. To set the time 11:59 p.m., provide the value as 59.
Example: To turn on the system automatically on weekdays.