Install the upgrade RPM package manually for CloudLink 8.0.2
Perform this task before you upload the ISO and then perform an upgrade from CloudLink 8.0 to CloudLink 8.0.2.
About this task
NOTE:Contact Dell Technologies Support to install the upgrade RPM package manually for CloudLink 8.0.1.
Steps
-
Log in to the CloudLink 8.0 operating system shell.
-
Copy the
upgrade-installer-for-cloudlink-8.0.x-and-8.x.rpm package to CloudLink server directory:
/home/cloudlink.
-
Go to:
/home/cloudlink/ and run
rpm -ivh --force upgrade-installer-for-cloudlink-8.0.x-and-8.x.rpm.
The RPM package is installed.
-
Upload the ISO from the web UI and click
Upgrade.
The system reboots.
Next steps
Verify the following:
- systemctl status m-multi service and
systemctl status ntpd services are running.
- The
gpg folder is created under the folder:
/etc .