- Notes, cautions, and warnings
- Executive summary
- Solution Overview
- Prerequisites
- Environmental requirements
- Power distribution unit (PDU) power-drop requirements
- Azure connection, identity store, and billing-model decisions
- Choosing connection options and identity store
- Features that are impaired or unavailable in disconnected mode
- Required customer-provided security certificates
- Mandatory certificates
- Optional PaaS certificates
- Certificate requirements and validation
- License requirements
- Azure Stack Hub endpoints and customer port requirements
- Hardware Infrastructure
- Hardware components
- Overview
- PowerEdge R840 server for dense and GPU scale units
- PowerEdge R740xd server for hybrid scale units
- PowerEdge R640 server for HLH and all-flash scale units (GPU support)
- PowerSwitch N3248TE-ON management switch
- PowerSwitch S5248F-ON ToR switch
- Cisco Nexus 93180YC-FX switch
- Cisco Nexus 9348GC-FXP switch
- Switch dimensions
- Dell Integrated System factory-rack dimensions
- Rail kit information
- Dense scale unit configuration
- Hybrid scale-unit configuration
- All-flash scale-unit configuration
- All-flash tactical configuration
- Hardware components
- Networking and Cabling
- Operations and Management Software
- Security
- Maintaining the Solution
- Backup and Recovery
- Conclusion
- License Retrieval
- Dell Technologies Support and Consulting Offerings
Dell Integrated System for Microsoft Azure Stack Hub Tech Book
S5248F-ON ToR 2 port map
The following table lists the connection and cable types, node ports, and switch ports for the S5248F-ON ToR 2 switch for the hybrid, all-flash, and dense configurations.
| Connection and cable type | From originating port | To switch port |
| 25 Gb Twinaxial | Node 01 NIC port 2 (rNDC2-2) | Port 01 |
| 25 Gb Twinaxial | Node 02 NIC port 2 (rNDC2-2) | Port 02 |
| 25 Gb Twinaxial | Node 03 NIC port 2 (rNDC2-2) | Port 03 |
| 25 Gb Twinaxial | Node 04 NIC port 2 (rNDC2-2) | Port 04 |
| 25 Gb Twinaxial | Node 05 NIC port 2 (rNDC2-2) | Port 05 |
| 25 Gb Twinaxial | Node 06 NIC port 2 (rNDC2-2) | Port 06 |
| 25 Gb Twinaxial | Node 07 NIC port 2 (rNDC2-2) | Port 07 |
| 25 Gb Twinaxial | Node 08 NIC port 2 (rNDC2-2) | Port 08 |
| 25 Gb Twinaxial | Node 09 NIC port 2 (rNDC2-2) | Port 09 |
| 25 Gb Twinaxial | Node 10 NIC port 2 (rNDC2-2) | Port 10 |
| 25 Gb Twinaxial | Node 11 NIC port 2 (rNDC2-2) | Port 11 |
| 25 Gb Twinaxial | Node 12 NIC port 2 (rNDC2-2) | Port 12 |
| 25 Gb Twinaxial | Node 13 NIC port 2 (rNDC2-2) | Port 13 |
| 25 Gb Twinaxial | Node 14 NIC port 2 (rNDC2-2) | Port 14 |
| 25 Gb Twinaxial | Node 15 NIC port 2 (rNDC2-2) | Port 15 |
| 25 Gb Twinaxial | Node 16 NIC port 2 (rNDC2-2) | Port 16 |
| 25 Gb Twinaxial | ToR 1 port 39 (BGP) | Port 39 |
| 25 Gb Twinaxial | ToR 1 port 40 (BGP) | Port 40 |
| 10 Gb Twinaxial | BMC port 52 | Port 44 |
| 25 Gb Fiber |
Customer border switch 4 (optional) |
Port 45 |
| 25 Gb Fiber |
Customer border switch 3 (optional) |
Port 46 |
| 25 Gb Fiber | Customer border switch 2 | Port 47 |
| 25 Gb Fiber | Customer border switch 1 | Port 48 |
| 200 Gb Twinaxial | ToR 1 VLTi peer link | Port 49/50 |
| 200 Gb Twinaxial | ToR 1 VLTi peer link | Port 51/52 |
NOTE: Ports 49/50 and 50/51 on the S5248F-ON use a single jack that can be configured with either a single density QSFP for 100 Gb connectivity or a double density QSFP for 200 Gb connectivity.
The standard shipping configuration is to have QSFP-DD cables running between the two ToRs for 200 GB connectivity. On the switches, the differences between using the 100 Gb single-density cables and the 200 Gb double-density cables is shown in the following tables.
| Port | Status | Speed | Duplex |
| Eth 1/1/49 | Up | 100 Gb | Full |
| Eth 1/1/50 | Down | 0 | Full |
| Eth 1/1/51 | Up | 100 Gb | Full |
| Eth 1/1/52 | Down | 0 | Full |
| Port | Status | Speed | Duplex |
| Eth 1/1/49 | Up | 100 Gb | Full |
| Eth 1/1/50 | Up | 100 Gb | Full |
| Eth 1/1/51 | Up | 100 Gb | Full |
| Eth 1/1/52 | Up | 100 Gb | Full |
The following table lists Cisco cable placement and port mapping.
NOTE: Cisco switch is only available with the customer-rack option. For details, see
Rail kit information.
| Cisco C93180YC-FX | Cisco 9348GC-FXP | ||||||
| Cable type | Originating port | ToR-1 switch port | Originating port | ToR-2 switch port | Cable type | Originating port | BMC switch port |
| 25 GB Twinax | Node-01 – rNDC1-1 | Port-01 | Node-01 – rNDC2-2 | Port-01 | 1 GB CAT6 | Node-01– iDRAC | Port-01 |
| Node-02 – rNDC1-1 | Port-02 | Node-02 – rNDC2-2 | Port-02 | Node-02– iDRAC | Port-02 | ||
| Node-03 – rNDC1-1 | Port-03 | Node-03 – rNDC2-2 | Port-03 | Node-03– iDRAC | Port-03 | ||
| Node-04 – rNDC1-1 | Port-04 | Node-04 – rNDC2-2 | Port-04 | Node-04– iDRAC | Port-04 | ||
| Node-05 – rNDC1-1 | Port-05 | Node-05 – rNDC2-2 | Port-05 | Node-05– iDRAC | Port-05 | ||
| Node-06 – rNDC1-1 | Port-06 | Node-06 – rNDC2-2 | Port-06 | Node-06– iDRAC | Port-06 | ||
| Node-07 – rNDC1-1 | Port-07 | Node-07 – rNDC2-2 | Port-07 | Node-07– iDRAC | Port-07 | ||
| Node-08 – rNDC1-1 | Port-08 | Node-08 – rNDC2-2 | Port-08 | Node-08– iDRAC | Port-08 | ||
| Node-09 – rNDC1-1 | Port-09 | Node-09 – rNDC2-2 | Port-09 | Node-09– iDRAC | Port-09 | ||
| Node-10 – rNDC1-1 | Port-10 | Node-10 – rNDC2-2 | Port-10 | Node-10– iDRAC | Port-10 | ||
| Node-11 – rNDC1-1 | Port-11 | Node-11 – rNDC2-2 | Port-11 | Node-11– iDRAC | Port-11 | ||
| Node-12 – rNDC1-1 | Port-12 | Node-12 – rNDC2-2 | Port-12 | Node-12– iDRAC | Port-12 | ||
| Node-13 – rNDC1-1 | Port-13 | Node-13 – rNDC2-2 | Port-13 | Node-13– iDRAC | Port-13 | ||
| Node-14 – rNDC1-1 | Port-14 | Node-14 – rNDC2-2 | Port-14 | Node-14– iDRAC | Port-14 | ||
| Node-15 – rNDC1-1 | Port-15 | Node-15 – rNDC2-2 | Port-15 | Node-15– iDRAC | Port-15 | ||
| Node-16 – rNDC1-1 | Port-16 | Node-16 – rNDC2-2 | Port-16 | Node-16– iDRAC | Port-16 | ||
|
ToR-2 Switch Port-39 |
Port-39 |
ToR-1 Switch Port-39 |
Port-39 | HLH-iDRAC | Port-46 | ||
|
ToR-2 Switch Port-40 |
Port-40 |
ToR-1 Switch Port-40 |
Port-40 | ToR-1 Switch MGMT | Port-47 | ||
| BMC Switch Port-51 | Port-44 | BMC Switch Port-52 | Port-44 | ToR-2 Switch MGMT | Port-48 | ||
| 10/25 GB Fiber |
Customer Border-4 (optional) |
Port-45 |
Customer Border-4 (optional) |
Port-45 | 10/25 GbE Twinax | HLH-PCI1-1 | Port-49 |
|
Customer Border-3 (optional) |
Port-46 |
Customer Border-3 (optional) |
Port-46 | HLH-PCI1-2 | Port-50 | ||
| Customer Border-2 | Port-47 | Customer Border-2 | Port-47 | 25 GbE Twinax | ToR-1 Port-44 | Port-51 | |
| Customer Border-1 | Port-48 | Customer Border-1 | Port-48 | ToR-2 Port-44 | Port-52 | ||
| 40/100 GB Twinax | ToR-2 Port-49 | Port-49 | ToR-1 Port-49 | Port-49 | |||
| ToR-2 Port-50 | Port-50 | ToR-1 Port-50 | Port-50 | ||||
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\