Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Chromebook 3110 Service Manual

PDF

Removing the display assembly

Prerequisites

  1. Follow the procedure in Before working inside your computer.
  2. Remove the base cover.
  3. Remove the WWAN card for computers enabled with 4G LTE.

About this task

The following images indicate the location of the display assembly and provide a visual representation of the removal procedure.

Removing the display assembly

Removing the display assembly

Steps

  1. Remove the screw (M2x3) that secures the WLAN card bracket to the WLAN card module on the system board.
  2. Lift and remove the WLAN card bracket from the WLAN card module that secures the two antenna cables.
  3. Disconnect the WLAN antenna cables from the connectors on the WLAN card module.
  4. Unroute the WLAN antenna cables from the routing guides in the palm-rest assembly.
  5. For computers enabled with 4G LTE, peel off and unroute the WWAN antenna cables from the routing guides on the palm-rest assembly.
  6. Remove the screw (M2x4) that secures the display-cable bracket to the display-cable connector on the system board.
  7. Remove the display-cable bracket from the display-cable connector on the system board.
  8. Peel the conductive tape that secures the display cable on the display hinges.
  9. Disconnect and peel back the display cable from the system board.
  10. Open the display assembly at an angle of 90 degrees and place the computer on the edge of a flat surface such that the display assembly extends below the edge of the surface.
  11. Remove the six screws (M2.5x5) that secure the display assembly in place.
  12. Lift the display assembly off the palm-rest assembly.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\