Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell Chromebook 3100 2-in-1 Service Manual

PDF

Installing display assembly

Steps

  1. Place the chassis on a plane surface.
  2. Align the display assembly with the screw holders on the system [1].
  3. Replace the six (M2.5x5.0) display hinge bracket screws that secure the display assembly to the system [2].
    Installing display assembly
  4. Lift the system and close the display.
  5. Connect the display cable to the connector on the system board [1].
  6. Affix the adhesive tape to secure the display cable to the system [2].
  7. Place the display cable bracket to secure the display cable [3].
  8. Replace the single (M2.0x4.0) screw that secures the display cable bracket to the system [4].
    Installing display assembly
  9. Connect the EMR cable to the connector on the system board [1].
  10. Connect the wireless antennas to the wireless module [2].
  11. Place the wireless bracket to secure the wireless antennas and replace the single (M2.0x3.0) screw that secures the wireless bracket to the system [3, 4].
    Installing display assembly

Next steps

  1. Install the battery.
  2. Install the base cover.
  3. Install the microSD card.
  4. Follow the procedure in after working inside your computer.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\