Dell EMC Avamar for VMware 19.7 User Guide

Selective protection: vCenter servers

This procedure protects just the vCenter server file-based VCF components, while providing more control over the backup settings used for them than quick protection. To protect other VCF components, refer to the other selective-protection procedures.

1. From a Avamar command line, type the following two commands:

   cd /usr/local/avamar/bin

   ./avamar-vcf-component-protection.sh

2. Enter credentials for Avamar server.
3. Enter the IP address or fully qualified domain name (FQDN) of the SDDC Manager server, and then enter credentials for the SDDC Manager server.
4. From the backup-script main menu, enter 2 twice.
5. Select the automatically discovered vCenter servers to protect.

   Enter a to protect all the servers. Otherwise, enter the numbers that correspond to the individual servers to protect, separating each number with a space.

6. Enter the address of an external server, including the backup directory path, followed by credentials to access the server.

   Supported protocols for the external server are FTP, SFTP, FTPS, HTTP, HTTPS, NFS, and SMB. The external server and backup directory path uses the format protocol://server_ip_address:port_number/folder/subfolder. For example:

   sftp://172.17.62.201:22/upload/backup

7. Select the days of the week a backup takes place, and then enter the time of day.

   Type a number that represents a day of the week, where 1 represents Sunday. If selecting multiple days of the week, separate the numbers with a space. For example, to select Sunday and Monday:

   1 2

   The time of day uses the format HH:MM in 24-hour notation. For example, to enter 1:25 p.m.:

   13:25

8. Confirm if the backups should be encrypted. If they should be encrypted, enter an encryption password.
   If you enter an encryption password, it must be between 8 and 20 characters in length and contain at least one lowercase letter, one uppercase letter, one number, and one special character.
9. Confirm if historical data should be backed up and the number of backups to retain.
   NOTE:In quick protection, the default is to back up historical data and retain all backups.
10. Confirm if common credentials should be used for all the vCenter servers:
    • Enter y to provide common credentials for all vCenter servers.
    • Enter n to be prompted for the credentials for each individual server.
11. If there is an existing vCenter server backup configuration, confirm if it should be overridden.
    NOTE:Should the existing backup configuration fail to be overridden, the vCenter server will be left without a backup configuration.
12. Protect the external server by selecting the File System policy.