Dell EMC Avamar for VMware 19.7 User Guide

Manually configuring proxy network settings

1. Launch the vSphere Client and log in to the ESX host.
2. Locate the proxy that you want to configure.
3. Right-click Open Console.
   A console window appears.
4. In the console Main Menu, press 2 to quit.
5. In the welcome screen, select Log in, and then press Enter.
6. Log in as the admin user.
7. Switch to the root user by typing:

   su -

8. Type /opt/vmware/share/vami/vami_config_net, and then press Enter.
   A Main Menu appears.
9. In the Main Menu, select 6, and then press Enter to configure the IP address for eth0.
   You can configure an IPv6 address, a static IPv4 address, or a dynamic IPv4 address. Follow the on-screen prompts to configure the correct address type for your site.
10. In the Main Menu, select 4, and then press Enter to configure DNS.
    Follow the on-screen prompts to specify the primary and secondary DNS servers in use at your site.
11. In the Main Menu, select 3, and then press Enter to configure the hostname.
12. Type the proxy hostname, and then press Enter.
13. In the Main Menu, select 2, and then press Enter to configure the default gateway.
14. Type the IPv4 default gateway, and then press Enter.
15. Press Enter to accept the default IPv6 default gateway.
16. In the Main Menu, press Enter to show the current configuration.
17. Ensure that the settings are correct.
18. Press 1 to exit the program.