Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell APEX Cloud Platform MC-760 Hardware Requirements and Specifications

PSU specifications

The MC-760 supports up to two AC or DC PSUs. The following table describes the PSU specifications for the system.
Table 1. PSU specifications This table describes the PSU specifications for the MC-760.
PSU Class Heat dissipation (max BTU/hr) Frequency (Hz) Voltage AC
High line wattage 200 VAC–240 VAC Low line wattage 100 VAC–120 VAC DC Current (Amps)
1100 W mixed mode Titanium 4100 50/60 100—240 VAC 1100 W 1050 W N/A 12—6.3
N/A 4100 N/A 240 VDC N/A N/A 1100 W 5.2
1400 W mixed mode Platinum 5250 50/60 100—240 VAC 1400 W 1050 W N/A 12—8
N/A 5250 N/A 240 VDC N/A N/A 1400 W 6.6
1800 W mixed mode Titanium 6750 50/60 200—240 VAC 1800 W N/A N/A 10
N/A 6750 N/A 240 VDC N/A N/A 1800 W 8.2
2400 W mixed mode Platinum 9000 50/60 100—240 VAC 2400 W 1400 W N/A 16—13.5
N/A 9000 N/A 240 VDC N/A N/A 2400 W 11.2
2800 W mixed mode Titanium 10500 50/60 200—240 VAC 2800 W N/A N/A 15.6
N/A 10500 N/A 240 VDC N/A N/A 2800 W 13.6
1100 W LVDC N/A 4265 N/A -48 VDC to -60 VDC N/A N/A 1100 W 27

Heat dissipation is calculated using the PSU wattage rating.

When selecting or upgrading the system configuration, use the Enterprise Infrastructure Planning Tool to ensure optimum power utilization and to verify power consumption.

NOTE:If AC 2400 W PSUs operate at low line 100-120 VAC, the power rating per PSU is degraded to 1400 W. If AC 1400 W or 1100 W PSUs operate at low line 100-120 VAC, the power rating per PSU is degraded to 1050 W.
Figure 1. PSU power connectors
this image shows list of PSU power cords

The following table describes the PSU power cables for the MC-760.

Table 2. PSU power cablesThis table describes the PSU power cables for the MC-760.
Form factor Output Power cord
Redundant 60 mm (2.36 in) 1100 W AC C13
1100 W -48 LVDC C13
1400 W AC C13
1800 W AC C15
Redundant 86 mm (3.39 in) 2400 W AC C19
2800 W AC C21

C19 power cable combined with C20 to C21 jumper power cable can be used to adapt 2800 W PSU.

C13 power cable combined with C14 to C15 jumper power cable can be used to adapt 1800 W PSU.


Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\