UEFI PXE Settings
|
Controls the configuration of the UEFI PXE device.
|
Number of PXE Devices
|
Specifies the number of PXE devices. By default, this option is set to
4.
|
PXE Device n (n = 1 to 4)
|
This option enables or disables the device. When enabled, a UEFI PXE boot option is created for the device.
|
PXE Device n Settings (n = 1 to 4)
|
Controls the configuration of the PXE device.
|
UEFI HTTP Settings
|
Controls the configuration of the UEFI HTTP device.
|
HTTP Device n (n = 1 to 4)
|
This option enables or disables the device. When enabled, a UEFI HTTP boot option is created for the device.
|
HTTP Device n Settings (n = 1 to 4)
|
Controls the configuration of the HTTP device.
|
UEFI iSCSI Settings
|
Controls the configuration of the iSCSI device.
|
iSCSI Initiator Name
|
Specifies the name of the iSCSI initiator in IQN format.
|
iSCSI Device1
|
This option enables or disables the iSCSI device. When disabled, a UEFI boot option is created for the iSCSI device automatically. By default, this option is set to
Disabled.
|
iSCSI Device1 Settings
|
Controls the configuration of the iSCSI device.
|
UEFI NVMe-oF Settings
|
Controls the configuration of the NVMe-oF devices.
|
NVMe-oF
|
This option enables or disables the NVMe-oF feature. When enabled, it allows you to configure the host and target parameters that are needed for fabric connection. By default, this option is set to
Disabled.
|
NVMe-oF Host NQN
|
This field specifies the name of the NVMe-oF host NQN. Input is allowed using the following format:
nqn.yyyy-mm.<Reserved Domain Name>:<Unique String>. Leave this field empty if you intend to use the system-generated value with the
nqn.1988-11.com.dell:<Model name>.<Model number>.<Service Tag> format.
|
NVMe-oF Host Id
|
This field specifies a 16-byte value of the NVMe-oF host identifier that uniquely identifies this host with the controller in the NVM subsystem. The input that is allowed is a hexadecimal-encoded string that uses the
00112233-4455-6677-8899-aabbccddeeff format. To use the system-generated value, leave the field empty.
NOTE:A value of all
FFFFFFFF-FFFF-FFFF-FFFF-FFFFFFFFFFFF is not allowed.
|
Host Security Key Path
|
This field specifies the Host security key path.
|
NVMe-oF SubSystem Settings
|
This field controls the parameters for the NVMe-oF subsystem n connections.
|