Dell APEX Cloud Platform MC-760 Hardware Requirements and Specifications

PDF

Right control panel view

This section provides information about the buttons and ports that are found on the right control panel on the MC-760.

This image shows the right control panel view — Figure 1. Right control panel

The following table describes the ports and buttons that are found on the right control panel of the MC-760 system.

Table 1. Right control panel This table describes the ports and buttons that are found on the right control panel of the MC-760 system.
Item	Port or button	Icon	Description
1	Power button		Indicates if the system is powered on or off. Press the power button to manually power on or off the system. Press the power button to gracefully shut down an ACPI-compliant operating system.
2	USB 2.0 port		The USB port is 4-pin, 2.0-compliant, and allows you to connect USB devices to the system.
3	iDRAC Direct (Micro-AB USB) port		Use a USB to micro USB (type AB) cable to configure iDRAC Direct to your laptop or tablet. NOTE:Do not exceed a cable length of 0.91 m (3 ft) as it could affect the performance. For more information about the iDRAC Direct Micro-AB USB port, see the Dell Support site and select the version and series of iDRAC that you have installed.
4	VGA port		Use this port to connect a display device to the system.

For more information about ports, panels, and slots on the MC-760 system, see Technical specifications.