Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell APEX Cloud Platform MC-660 Hardware Requirements and Specifications

Thermal air restrictions

The information that is provided describes the thermal air restrictions for the MC-660.

ASHRAE A2 environment

  • CPU > 300 W is not supported in 10 x 2.5-inch storage configuration.
  • CPU > 270 W is not supported in 10 x 2.5-inch storage with rear drive configuration.
  • Maximum 30°C (86°F) for CPU > 270 W in 10 x 2.5-inch storage configuration.
  • Maximum 30°C (86°F) for CPU > 250 W with rear drive in 10 x 2.5-inch storage configuration.
  • Maximum 30°C (86°F) for CPU > 250 W with 256G RDIMM in 10 x 2.5-inch storage configuration.
  • Maximum 30°C (86°F) for CPU > 225 W with 256G RDIMM in 10 x 2.5 rear drive configuration.
  • CPU > 350 W is not supported in no BP chassis storage configuration.
  • Maximum 30°C (86°F) for CPU > 300 W in no BP chassis storage configuration.

ASHRAE A3 environment

  • CPU > 185 W is not supported in 10 x 2.5-inch storage configuration.
  • CPU > 205 W is not supported in 8 x 2.5-inch and no BP chassis storage configuration.
  • 128 GB or greater capacity RDIMMs are not supported.
  • 2.5-inch NVMe storage is not supported in a 10 x 2.5-inch storage configuration.
  • Rear drives are not supported.
  • Non Dell Technologies qualified peripheral cards and/or peripheral cards greater than 25 W are not supported.
  • A2 GPU is not supported.
  • 85°C (185°F) active optics cable is required.
  • Two power supplies are required. If a PSU fails, system performance may be reduced.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\