|
Intel(R) SpeedStep(TM) |
Enables
you to enable or disable Intel Speedstep Technology. Default: Enabled NOTE If enabled, the processor
clock speed and core voltage are adjusted dynamically based on the
processor load. |
|
Integrated NIC |
Enables
you to enable or disable the on-board LAN controller. Default: Enabled |
|
USB Emulation |
Enables
you to enable or disable the USB emulation feature. This feature defines
how the BIOS, in the absence of a USB-aware operating system, handles
USB devices. USB emulation is always enabled during POST. Default: Enabled NOTE You cannot boot any
type of USB device (floppy, hard drive, or memory key) when this option
is off. |
|
USB Powershare |
Enables
you to charge USB devices when the computer is turned off or in standby
mode. Default: Enabled |
|
USB Wake Support |
Enables
you to enable the USB devices to wake the computer from Standby. Default: Disabled NOTE If USB PowerShare is
enabled, a device connected to the USB PowerShare connector may not
wake the computer. |
| Sleep Mode | Enable or disable sleep mode. |
| Intel Speed Shift Technology | Enable/disable Intel Speed Shift Technology support. Setting this option to enable to allows the operating system to select the appropriate processor performance automatically. Default: Enabled |
|
SATA Operation |
Enables
you to configure the operating mode of the integrated SATA hard drive
controller. Default: AHCI |
|
Adapter Warnings |
Ebales
you to choose if the computer should display warning messages when
you use AC adapters that are not supported by your computer. Default: Enabled |
|
Function Key Behavior |
Enables
you to set function key or multimedia key as the default function
key behavior. Default: Function key |
|
Express Charge |
Enables
you to charge your computer battery using Standard Charge or Express
Charge mode. Default: Express Charge |
|
Battery Health |
Displays
the battery health. |
|
Intel(R) Software Guard Extensions |
Enable or disable Intel Software Guard Extensions. Default: Software Controlled |
| Intel(R) Software Guard Extensions allocated memory size | Displays the allocated memory size for Intel Software Guard Extensions. |
|
BIOS Recovery from Hard Drive |
Enable
the user to recover from certain corrupted BIOS conditions from a
recovery file on the user primary hard drive Default:
Enabled |
| BIOS Auto-Recovery | Enable or disable BIOS Auto-Recovery. Default: Disabled |
|
SupportAssist System
Resolution |
|
Auto
OS Recovery Threshold |
Control the automatic boot flow for SupportAssist
System Resolution Console and for Dell OS Recovery tool. Default: 2 |
| SupportAssist OS Recovery | Enable or disable SupportAssist OS recovery. Default:
Enabled |
| Intel(R) Rapid Storage Technology |
| Non-RAID Physical Disks | Displays the disk using the Intel(R) Rapid Storage Technology. |