Advanced
BIOS Features
|
|
|
Intel SpeedStep |
Allows
you to enable or disable Intel Speedstep Technology. Default: Enabled.
-
NOTE: If enabled, the processor
clock speed and core voltage are adjusted dynamically based on the
processor load.
|
|
Virtualization |
Allows
you to enable or disable Intel Virtualization Technology feature for
the processor.
|
|
VT for Direct I/O |
Allows
you to enable or disable Intel Virtualization Technology feature for
the Direct I/O.
|
|
SATA Operation |
Allows
you to configure the operating mode of the integrated SATA hard drive
controller.
|
|
Intel Ready Mode Technology |
Allows
you to enable or disable the Intel Ready Mode Technology.
|
|
Intel Software Guard Extensions |
Allows
you to enable or disable Intel Software Guard Extensions.
|
|
BIOS Recovery from Hard Drive |
Allows
you to enable or disable BIOS Recovery from hard drive.
|
USB
Configuration
|
|
|
Front USB Ports |
Allows
you to enable or disable the front USB ports.
|
|
Rear USB Ports |
Allows
you to enable or disable the rear USB ports.
|
Power
Options
|
|
|
Numlock Key |
Allows
you to set the status of the Num Lock key during boot to On or Off.
|
|
Wake Up by Integrated LAN |
Allow
the computer to be powered on by special LAN signals.
|
|
AC Recovery |
Sets
what action the computer takes when power is restored.
|
|
Deep Sleep Control |
Allows
you to define the controls when Deep Sleep is enabled.
|
|
USB Wake Support (S3) |
Allows
you to enable the USB devices to wake the system from Standby.
|
|
USB PowerShare (S4/S5) |
Allows
you to charge external devices.
|
|
USB PowerShare Wake Support (S4/S5) |
Allows
you to enable front the USB devices to wake the system from S4/S5.
|
|
Auto Power On |
|
|
|
Auto Power On Mode |
Allows
you to set the computer to turn on automatically every day or on a
preselected date. This option can be configured only if the Auto Power
On mode is set to Enabled Everyday or Selected Day.
|
|
|
Auto Power On Date |
Allows
you to set the date on which the computer must turn on automatically.
This option can be configured only if the Auto Power On mode is set
to Enabled 1 to 31.
|
|
|
Auto Power On Time |
Allows
you to set the time at which the computer must turn on automatically.
This option can be configured only if the Auto Power On mode is set
to Enabled hh:mm:ss.
|
Performance Options
|
|
Overclocking Feature |
|
|
|
Core Over Clocking Level |
Allows
you enable or disable the OC level1/level2 setting and adjust the
processor flex ratio and voltage in the Customization mode.
|
|
|
Computrace |
Allows
you to enable or disable the Computrace service using the Absolute
software.
|
|
|
Core Ratio Limit Override |
Allows
you to set the core ratio limit.
|
|
|
Single Core |
Allows
you to select single core or multiple cores.
|
|
|
Core Voltage Mode |
Allows
you to select between adaptive and override voltage modes.
|
|
|
Core Voltage Offset |
Allows
you to set the override value of core voltage.
|
|
|
Long Duration PWR Limit |
Allows
you to set the turbo mode power limit.
|
|
|
Short Duration PWR Limit
Options
|
Allows
you to set the turbo mode power limit.
|
|
|
XMP
Memory
|
Allows
you to set the XMP memory.
|