Aurora R6 Service Manual

Procedure

1. Ensure that the securing clips are extended away from the memory-module slot.
2. Align the notch on the memory module with the tab on the memory-module slot.
3. Insert the memory module into the memory-module slot and press the memory module down until it snaps into position and the securing clips lock in place.

   

   1. memory module
   2. securing clips (2)
   3. memory-module slot
   4. system board

   NOTE: Use slots XMM1 and XMM2 if you need to use two memory modules. For more information, see System-board components.

   The following table lists the available memory configuration matrix:

   Table 1. Memory configuration matrixLists the available memory configuration matrix.

   Configuration	Slot
   	DIMM1	DIMM2	DIMM3	DIMM4
   8 GB DDR4	4 GB	4 GB
   12 GB DDR4	4 GB	8 GB
   16 GB DDR4	8 GB	8 GB
   16 GB DDR4	16 GB
   32 GB DDR4	8 GB	8 GB	8 GB	8 GB
   64 GB DDR4	16 GB	16 GB	16 GB	16 GB
   8 GB XMP	4 GB	4 GB
   16 GB XMP	8 GB	8 GB