Alienware Aurora R15 Service Manual

Screw list

NOTE:When removing screws from a component, it is recommended to note the screw type, and the quantity of screws, and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is restored when the component is replaced.

NOTE:Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when replacing a component.

NOTE:Screw color may vary with the configuration ordered.

Table 1. Screw listThe following table provides the different screws that are used in your Alienware Aurora R15.
Component	Screw type	Quantity	Screw image
Power-supply unit bracket	#6-32x1/4"	2
Power-supply unit bracket (for computers shipped with clear left-side cover)	#6-32x1/4"	2
Power-supply unit	#6-32x1/4"	4
Power-supply unit (for computers shipped with clear left-side cover)	#6-32x1/4"	4
Side light (for computers shipped with clear left-side cover)	M3x5	2
Radiator and fan assembly for liquid cooler	M3x5	2
Rear-chassis fan	M3x5	1
Lower front-chassis fan	M3x5	1
Solid-state drive (M.2 slot one)	M2x3	1
Solid-state drive (M.2 slot two)	M2x3	1
Wireless card	M2x3	1
System board	#6-32x1/4"	9
Front I/O bracket	#6-32x1/4"	1
Liquid-cooling assembly fan	#6-32x1/4"	4