Alienware Aurora R15 Service Manual

Removing the single-graphics card (with screw)

1. Lay the computer on the right side.
2. Slide the release latch to its unlock position and lift the graphics-card end holder away from the lower front-chassis fan.
   NOTE:Skip this step if your graphics card does not ship with a graphics-card end holder.
3. Remove the screw (#6-32) that secures the graphics-card bracket to the chassis.
   NOTE:Skip this step if your graphics card does not ship with a graphics-card bracket.
4. Lift the pull tab and open the expansion-card door.
5. Press the releasing clip on the graphics-card power connectors and disconnect the graphics-card power cables from the graphics card.
6. Push the securing tab on the PCIe slot away from the graphics card, grasp the card by its top corner, and ease it out of the slot.