Alienware Aurora R11 Service Manual

Screw list

NOTE When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is restored when the component is replaced.

NOTE Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surface when replacing a component.

NOTE Screw color may vary with the configuration ordered.

Table 1. Screw listScrew list
Component	Secured to	Screw type	Quantity	Screw image
Side-panel release latch	Chassis	6-32x12-7L	1
2.5-inch hard-drive cage	Chassis	#6-32	2
3.5-inch hard-drive cage	Chassis	#6-32	2
Power-supply unit bracket	Power-supply unit cage	#6-32	2
Power-supply unit	Chassis	#6-32	4
Right tron-light board	Chassis	#6-32	4
Radiator and fan assembly	Radiator and fan cage	#6-32	4
Antennas	Chassis	M3x4t	4
Top bezel	Chassis	#6-32	4
Solid-state drive	System board	M2x2.5	1
Wireless card	System board	M2x2.5	1
Cable-management panel	Chassis	#6-32	2
Front-panel light-board	Front bezel	M2x4	4
Power button module	Front bezel	M2x4	2
Front I/O-panel	Front bezel	M3x4	4
System board	Chassis	#6-32	8