Intel SpeedStep
|
Enables or disables the Intel SpeedStep mode of processor.
Default: Enabled
|
Intel Speed Shift Technology
|
Enables or disables the Intel Speed Shift Technology. This option enables the operating system to select the appropriate processor performance automatically.
Default: Enabled
|
Hyper-Thread Control
|
Allows you to enable or disable the HyperThreading in the processor.
Default: Enabled
|
Integrated NIC
|
Enables you to configure the onboard LAN controller.
Choose one of the following options:
- Disabled: The internal LAN is off and not visible to the operating system
- Enabled: The internal LAN is enabled
Default: Enabled
|
USB Emulation
|
Enables or disables the USB emulation feature. This feature defines how the BIOS, in the absence of a USB-aware operating system, handles USB devices. USB emulation is always enabled during POST.
Default: Enabled
NOTE: You cannot boot any type of USB device (floppy, hard drive, or memory key) when this option is off.
|
USB Powershare
|
Enables or disables the USB PowerShare feature. This option enables you to charge external devices using the stored system battery power through the USB PowerShare port when the computer is turned off or in standby mode.
Default: Enabled
|
USB Wake Support
|
Enables or disables the USB devices to wake the computer from Standby.
Default: Disabled
NOTE: If USB PowerShare is enabled, a device that is connected to the USB PowerShare connector may not wake the computer.
|
SATA Operation
|
Enables you to configure the operating mode of the integrated SATA drive controller.
Choose one of the following options:
- ATA: SATA is configured for ATA mode.
- AHCI: SATA is configured for AHCI mode.
- RAID: SATA is configured for RAID mode.
- RAID On: SATA is configured for RAID mode
- Intel Smart Response Technology: SATA is configured for RAID mode
Default: RAID On
|
Adapter Warnings
|
Enables or disables the system setup (BIOS) warning messages when you use certain power adapters.
Default: Disabled
|
Function Key Behavior
|
Enables you to set function key or multimedia key as the default function key behavior.
Default: Function Key
|
Touchpad Backlight
|
Enables you to choose the operating mode of the touchpad backlight feature.
Default: Auto
|
Battery Health
|
Displays the battery health.
|
Camera
|
Enables or disables the integrated camera. When enabled, the camera functions normally. When disabled, the camera is hidden from the OS (example: not seen in the Device Manager).
Default: Enabled
|
Thunderbolt
|
Enables or disables Thunderbolt technology support.
The options are:
Default: Enabled
|
Thunderbolt Boot Support
|
Enables or disables booting from storage devices connected to Thunderbolt port.
Default: Disabled
|
Enable Thunderbolt (and PCIe behind TBT) Pre-boot Modules
|
Default: Disabled
|
Thunderbolt Adapter Configuration
|
Default: No Security
|
Performance Options
|
|
Overclocking Feature
|
Enables or disables the global overclocking functions.
Default: Enabled
|
Core Overclocking Level#
|
Enables the CPU to adjust the Flex Ratio and Voltage in a Turbo Mode environment can be modified.
Default: Customization
|
XMP Memory
|
Enables the XMP mode.
Default: Disabled
|
Fan Performance Mode
|
Enables or disables Fan to full speed for CPU cooling.
Default: Enabled
|
Maintanance
|
|
Data Wipe on next boot
|
If enabled, the BIOS will queue up a data wipe cycle for storage devices that are connected to the motherboard on the next reboot.
Default: Enabled
|
Start This Device Sanitization
|
|
Start All Media Sanitization
|
|
BIOS Recovery from Hard Drive
|
Enables the computer to recover from a bad BIOS image, as long as the Boot Block portion is intact and functioning.
Default: Enabled
|
BIOS Auto-Recovery
|
Enables the computer to automatically recover the BIOS without user actions. This feature requires BIOS Recovery from Hard Drive to be set to Enabled.
Default: Disabled
|
SupportAssist System Resolution
|
|
Auto OS Recovery Threshold
|
Controls the automatic boot flow for SupportAssist System Resolution Console and for Dell operating system Recovery tool.
Default: 2
|
SupportAssist OS Recovery
|
Enables or disables the boot flow for SupportAssist operating system Recovery tool in the even of certain system errors.
Default: Enabled
|
Battery Charge Configuration
|
Enables the computer to run on battery during power usage hours. Use the below options to prevent AC power usage between certain times of each day.
Default: Adaptive
|
Advanced Battery Charge Configuration
|
Enables Advanced Battery Charge Configuration from the beginning of the day to a specified work period. Advanced Battery Charged maximizes battery health while still supporting heavy use during the work day.
Default: Disabled
|
Intel Rapid Storage Technology
|
Displays the RAID information.
|