Alienware Area-51 Threadripper Edition R7 Service Manual

Procedure

1. Route the cable through the slot on the bracket and align the screw holes on the left AlienFX side-panel connector with the screw holes on the bracket.
2. Replace the two screws (#6-32x6) that secure the AlienFX side-panel connector to the bracket.
   
3. Align the screw hole on the left AlienFX side-panel connector with the screw hole on the chassis.
4. Replace the screw (#6-32x6) that secures the left AlienFX side-panel connector to the chassis.
5. Route the AlienFX side-panel cable through the routing guides on the chassis
   
6. Turn the chassis over.
7. Route the cable through the securing clip and through the slot on the chassis.
8. Connect the cable that connects the left AlienFX side-panel connector to the system board. See “I/O-board components”.