Alienware Area-51 Threadripper Edition R7 Service Manual

Procedure

1. Place the antenna cables in place and slide the antenna cables through the slot on the chassis.
2. Replace the six screws (#6-32x6) that secure the antenna cables to the chassis.
3. Adhere the tape that secures the antenna cables to the chassis.
4. Route the antenna cable through the slot on the chassis and then through the routing guides on the chassis.
5. Turn the chassis over.
6. Route the antenna cable through the slot on the chassis.
7. Route the antenna cables through the routing guides on the chassis.
8. Turn the chassis over.
9. Route the antenna cable through the slot on the chassis.
10. Route the antenna cables through the routing guide on the chassis.
11. Connect the antenna cables from the wireless card.