Alienware Area-51 R5 Service Manual

Procedure

1. Lay the chassis on the right side.
2. Disconnect the antenna cables from the wireless card.
3. Remove the antenna cables from the routing guide on the chassis.
4. Slide the antenna cables through the slot on the chassis.
   
5. Turn the chassis over.
6. Remove the antenna cables from the routing guide on the chassis.
7. Slide the antenna cable through the slot on the chassis.
   
8. Turn the chassis over.
9. Remove the antenna cables from the routing guide on the chassis and slide the antenna cable through the slot on the chassis.
   
10. Peel the tape that secures the antenna cables to the chassis.
11. Remove the six screws (#6-32x6) that secure the antenna cables to the chassis.
12. Pull the antenna cables from the slot on the chassis and remove.