Alienware Area-51 R5 Service Manual

Procedure

1. Route the cable through the slot on the bracket and align the screw holes on the right AlienFX side-panel connector with the screw holes on the bracket.
2. Replace the two screws (#6-32x6) that secure the right AlienFX side-panel connector to the bracket.
3. Align the screw hole on the right AlienFX side-panel connector assembly with the screw hole on the chassis.
4. Replace the screw (#6-32x6) that secures the right AlienFX side-panel connector assembly to the chassis.
5. Route the right AlienFX side-panel cable through the routing guides on the chassis.
6. Connect the cable that connects the right AlienFX side-panel connector to the I/O board. See “I/O-board components”.