Alienware Area-51 R4 Service Manual

Procedure

1. Remove the four screws (#6-32x6) that secure the front bezel to the bottom and top of the chassis.

   

   1. screws (4)
   2. front bezel

2. Remove the two screws (6-32x5.2) from inside, securing the front bezel to the left side of the chassis.
3. Remove the screw (6-32x5.2) from inside, securing the front bezel to the right side of the chassis.
4. Release the tabs from inside the chassis on the right side, securing the front bezel to the chassis.

   

   1. chassis
   2. tabs (2)
   3. screws (3)

5. Pull the connector downwards and then disconnect the bottom tron light-cables from the front bezel.
6. Pull the connector downwards and then disconnect the top tron light-cables from the front bezel.
7. Pull the front bezel off the chassis.

   

   1. front bezel
   2. tron-light cables