Alienware Area-51 R4 Service Manual

Procedure

1. Connect the antenna cables to the wireless card.
2. Align the notch on the wireless card with the tab on the wireless-card slot.
3. Insert the wireless card at an angle into the connector.
4. Replace the screw (M2x3) that secures the wireless card to the chassis.
   A label at the tip of the antenna cables indicates the color scheme for the wireless card supported by your computer.

   Table 1. Antenna-cable color scheme

   The following table lists connectors on the wireless card and the color scheme of the antenna cable.

   Connectors on the wireless card	Antenna-cable sticker color
   Auxiliary (1)	Black
   Main (2)	White