Alienware Area-51 R4 Service Manual

Procedure

1. Lay the chassis on the left side.
2. Locate the memory modules on the system board. For more information on the memory modules see “system-board components”.
3. Use your fingertips to carefully spread apart the securing-clips on each end of the memory-module slot.
4. Grasp the memory module near the securing clip, and then gently ease the memory module out of the memory-module slot.
   NOTE: Repeat step 2 to step 3 to remove any other memory modules installed in your computer.

   

   1. securing clips (2)

   2. memory module

   3. memory-module slot