Alienware Area-51 R4 Service Manual

Procedure

1. Align and place the bottom-handle bar on the slot and snap the bottom-handle bar to the chassis.
2. Replace the seven screws (#6-32x6.5) that secure the bottom-handle bar to the left side of the chassis.
3. Replace the seven screws (#6-32x6.5) that secure the bottom-handle bar to the right side of the chassis.
4. Align and place the front-handle bar on the slot and snap the front-handle bar to the chassis.
5. Replace the seven screws (#6-32x6.5) that secure the front-handle bar to the left side of the chassis.
6. Replace the seven screws (#6-32x6.5) that secure the front-handle bar to the right side of the chassis.
7. Align and place the rear-handle bar on the slot and snap the rear-handle bar to the chassis.
8. Replace the seven screws (#6-32x6.5) that secure the rear-handle bar to the left side of the chassis.
9. Replace the seven screws (#6-32x6.5) that secure the rear-handle bar to the right side of the chassis.