- Notes, cautions, and warnings
- Working inside your computer
- Removing and installing components
- Drivers and downloads
- System setup
- Troubleshooting
- Getting help and contacting Dell
The following table shows the outcome of running different types of BIST.
M-BIST | |
---|---|
Off | No fault detected with system board. |
Solid amber | Indicates a problem with the system board. |
L-BIST | |
Off | No fault detected with system board. |
LED error code of [2,8] blinks Amber x2, then pause, then blinks White x8 | Indicates a problem with the system board. |
LCD-BIST | |
The LCD that flashes White, Red, Green, and Blue shows that the display is working fine and there is no fault with the LCD panel. |