Application=<application name>
|
Use the published application name
in non-interactive mode.
|
AutoConnect={no, yes}
|
Default is no
AutoConnect option is used to start a connection automatically at
sign-on.
|
Description=<string description>
|
Default is none
Connection description provides a connection name for
the Desktop icon and the Connection Manager.
-
CAUTION: The
text must be enclosed in quotation marks if it contains spaces or
punctuation characters. These characters are not allowed & ‘ “
$ ? ! | ; ( ) [ ] { } \
|
Desktop=<desktop name>
|
Use the published desktop name
in non-interactive mode.
|
Desktopsize={ fullscreen, largewindow,
smallwindow, useallmonitors, 1024x768, 800x600, 640x480 }
|
Default is fullscreen.
Specifies the desktop size either fullscreen, largewindow,
smallwindow or use exact size in the form XxY.
|
Disableconnectonce={no, yes}
|
Default is no.
This option disables the listing of View desktops after
session logs out when an error occurs.
|
Disableviewmenubar={no, yes}
|
Default is no.
This option helps you to disable top full screen drop-down
menu bar.
|
DomainName=<string>
|
Specifies the domain name in a
Windows network where the VMware server is located.
|
EnableNLA={yes,no}
|
Default is no.
This option initiates the authentication and prompts you
to enter the login credentials when you try to add a new VMware connection.
|
EnableUDP={yes,no}
|
Specifies whether UDP networking
should be enabled in the session.
Default is yes.
|
EnableH264={yes,no}
|
Specifies whether H.264 decoding
should be enabled in the session.
Default is yes.
|
Fullscreenmode={no, yes}
|
Default is no.
This option enables full screen mode and when selected
it disables the Desktopsize option.
|
EnableMMR={yes,no} |
Default is no.
Enable/disable
MMR in VMWare View connection settings.
|
Host=<host server name or IP
address>
|
Default is none
Specifies the server name or IP address to connect.
-
NOTE: This option is mandatory.
|
Icon=<image file>
|
Specifies an icon to appear on the
local desktop or Connection Manager. The file must be located in the
server wlx2/bitmap directory. If not specified, the default icon is
displayed except in the case of a published application. A PNG, JPEG
or GIF may be used. XPM is permitted for backward compatibility.
|
Interactive={yes, no}
|
Default is yes.
Interactive option is used to enable interactive connection
mode.
|
LockServerURLField={yes,no}
|
Default is yes.
This option enables the
New Server option when
you try to add a new VMware connection.
|
Monitors=<numbered list>
|
Enter a value to specify which
subset of the monitors to use.
For Example : Monitors=
2,3 If you specify the numbered list as 2, 3 in a configuration where
four monitors are set next to each other horizontally, the windows
session will be displayed in the 2nd and 3rd monitors only and local
session will be available in 1st and 4th monitors.
|
Password={base-64 encoded password
string , $SN, $MAC, $IP, $DN, $UN, $PW, $TN}
|
Specifies the password required to log in to the
application server. Either a base-64 encoded login password or a variable
can be used.
password — base-64 encoded login password.
Variable and Description: $SN — Serial number
$MAC — MAC address
$IP — IP Address
$DN — Sign-on domain name
$UN —
Sign-on name
$PW — Sign-on password
$TN — Terminal name
-
NOTE: The application server
password is not encrypted; not specifying it is recommended. The user
is prompted to enter the password when the connection is made. This
application server password directive never starts a line, so it can
be distinguished from the thin client user sign-on password which
starts a line.
|
Ping={yes, no}
|
Default is yes.
You can enable the ping using Ping parameter. For non-published
application connections, a ping (ICMP) is sent to the host server
prior to connect, to verify that the host is reachable.
|
Port=<port number>
|
Default is 443. Specifies
a different port number other than default 443 for SSL connection.
|
Protocol={PCOIP, RDP, Blast}
|
Default is PCoIP.
Specifies the protocol to use.
|
Reconnect={no, yes}
|
Default is no.
Reconnect option is used to automatically reconnect to
an application server after a disconnection.
|
ReconnectSeconds=<value in
seconds>
|
Default is 30.
Specifies the amount of time in seconds (default is 30)
to wait before automatic reconnection to an application server after
a disconnection. Reconnect=yes is required.
|
SecureMode={neverconnect, warnbefore,
donotverify}
|
Default is warnbefore.
Specifies how to control the connection security
mode preferences.
Value and Description:
neverconnect — Never connect to untrusted servers.
warnbefore — Warn before connecting to untrusted
servers.
|
Username={<username>, $SN,
$MAC, $IP, $DN, $UN, $PW, $TN}
|
Specifies the name required to
log in to the application server. Either a conventional login name
or a variable can be used.
Variable and Description:
username — Conventional login name
$SN — Serial number
$MAC — MAC address
$IP — IP Address
$DN — Sign-on domain
name
$UN — Sign-on name
$PW —
Sign-on password
$TN — Terminal name
|
UsbAutoConnectOnInsert= {
yes, no}
|
Specifies whether the USB should
be automatically connected in session on inserting the USB.
Default
is yes
.
|
UsbAutoConnectAtStartup= {
yes, no}
|
Specifies whether the USB should
be automatically connected in session on Session Startup.
Default
is yes
.
|
view.sslCipherString
|
Configures the cipher list to
restrict the use of certain cryptographic algorithms before establishing
an encrypted SSL connection.
The default value for Horizon Client
3.5 and later is !aNULL:kECDH+AES:ECDH+AES:RSA+AES:@STRENGTH.
The default value for Horizon Client 3.4 and
earlier is AES:!aNULL:@STRENGTH.
|
view.sslProtocolString
|
Configures the cipher list to restrict the use
of certain cryptographic protocols before establishing an encrypted
SSL connection.
The default value for Horizon Client
3.5 and later is TLSv1.0:TLSv1.1:TLSv1.2.
The default value for Horizon Client 3.4 and earlier is TLSv1.0:TLSv1.1.
|