Dell Unity™ Family Unisphere® Command Line Interface User Guide

View existing drives.

Format

Object qualifier

Example 1

The following command displays the basic attributes of all drives on a physical deployment.

Storage system address: 10.0.0.1
Storage system port: 443
HTTPS connection

1:     ID                 = DISK_0
       Enclosure          = DAE_1
       Slot               = 0
       Health state       = OK (5)
       User capacity      = 2199023255552 (2T)
       Used by FAST Cache = no
       Pool ID            = pool_1

2:     ID                 = DISK_1
       Enclosure          = DAE_1
       Slot               = 1
       Health state       = OK (5)
       User capacity      = 2199023255552 (2T)
       Used by FAST Cache = no
       Pool ID            = pool_1

Example 2

The following command displays the details of all drives on a physical deployment.

Storage system address: 10.0.0.1
Storage system port: 443
HTTPS connection

1:    ID                    = dae_1_2_disk_59
      Enclosure             = dae_1_2
      Slot                  = 59
      Bank slot             = C19
      Name                  = Disk 59
      Health state          = OK (5)
      Health details        = "The component is operating normally. No action is required."
      Type                  = SAS
      Tier                  = performance
      Capacity              = 881132310528 (820.6G)
      Rotational speed      = 10000 rpm
      User capacity         = 797989670912 (743.1G)
      Used by FAST Cache    = no
      Pool ID               = Unconfigured
      Pool                  = Unconfigured
      Current speed         = 6 Gbps
      Maximum speed         = 6 Gbps
      Manufacturer          = SEAGATE
      Model                 = ST990080 CLAR900
      Vendor capacity       = 966367641600 (900.0G)
      Part number           = 005049206PWR
      Serial number         = 6XS3A9CG
      Firmware revision     = CS19
      WWN                   = 06:00:00:00:05:00:00:00:01:00:00:00:00:00:00:03
      Days remaining to EOL = 1497

Example 3

The following command displays the details of all drives on a single-SP virtual deployment.

Storage system address: 10.0.0.1
Storage system port: 443
HTTPS connection

1:     ID                 = vdisk_1
       SCSI ID            = 0:3
       Name               = Virtual Disk 1
       Health state       = OK (5)
       Health details     = "The component is operating normally. No action is required."
       Type               = virtual
       Tier               = capacity
       Capacity           = 268435456000 (250.0G)
       Rotational speed   =
       User capacity      = 268435435520 (249.9G)
       Pool ID            = pool_1
       Pool               = StoragePool00
       Current speed      =
       Maximum speed      =
       Manufacturer       = VMware
       Model              = Virtual disk
       Vendor capacity    = 268435456000 (250.0G)
       WWN                = 06:00:00:00:05:00:00:00:04:00:00:00:00:00:00:03

Example 4

The following command displays the details of all drives on a dual-SP virtual deployment.

Storage system address: 10.0.0.1
Storage system port: 443
HTTPS connection

1:     ID                 = vdisk_1
       SCSI ID SPA        = 0:3
       SCSI ID SPB        = 0:4
       Name               = Virtual Disk 1
       Health state       = OK (5)
       Health details     = "The component is operating normally. No action is required."
       Type               = virtual
       Tier               = capacity
       Capacity           = 268435456000 (250.0G)
       Rotational speed   =
       User capacity      = 268435435520 (249.9G)
       Pool ID            = pool_1
       Pool               = StoragePool00
       Current speed      =
       Maximum speed      =
       Manufacturer       = VMware
       Model              = Virtual disk
       Vendor capacity    = 268435456000 (250.0G)
       WWN                = 06:00:00:00:05:00:00:00:04:00:00:00:00:00:00:03