Dell Unity™ Family Unisphere® Command Line Interface User Guide

Format

Object qualifier

Example

The following command displays details for a LUN move session.

Storage system address: 10.0.0.1
Storage system port: 443
HTTPS connection

1:    ID                    = movesession_1
      Source resource       = sv_1
      Source member LUN     = 
      Destination pool      = pool_1
      State                 = Initializing
      Progress              = 0%
      Health state          = OK
      Health details        = "The component is operating normally. No action is required."
      Priority              = Normal
      Average transfer rate = 0 MB/s
      Current transfer rate = 0 MB/s
      Estimated time left   = N/A

2:    ID                    = movesession_2
      Source resource       = res_1
      Source member LUN     = lun_2    
      Destination pool      = pool_2
      State                 = Running
      Progress              = 17%
      Health state          = OK
      Health details        = "The component is operating normally. No action is required."
      Priority              = Above Normal
      Average transfer rete = 147 MB/s
      Current transfer rate = 232 MB/s
      Estimated time left   = 7m