Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Baskets

Dell Unity™ Family Unisphere® Command Line Interface User Guide

PDF

Change IP routes

Modify an existing IP route.

Format

/net/route set route -id <value> set [-type {default | host | net}] [-target <value> [-netmask <value>]] [-gateway <value>]

Object qualifier

QualifierDescription
-idIdentifies the route object.

Action qualifier

QualifierDescription
-typeSpecify the type of route. Only one default IPv4 route instance is allowed. Valid values are (case-insensitive):
  • default — System uses the default gateway when it cannot find a more specific host or network route.
  • host — Create a route to a host.
  • net — Create a route to a subnet.
-targetSpecify the destination IP address or a range of IP addresses. If the route type is:
  • host, the value is an IP address of the host.
  • net, the value is a subnet IP address with the following format: <IPv4 address>/[<prefix length>] or <IPv6 address>/[<prefix length>].

Default prefix length is 24 for IPv4 address and 64 for IPv6 address.

Valid values are:

  • For a default route, the system uses the IP address specified for -gateway.
  • For a host route, specify the IP address of a target host.
  • For a net route, specify the IP address of a target subnet. Include the -netmask qualifier to specify the IP address of the subnet mask.
-netmaskFor a route to a subnet, type the IP address of the subnet mask.
-gatewaySpecify the gateway IP address for the route.

Example

The following command changes the target IP address to 10.64.200.11, the netmask to 255.255.255.0, and the gateway to 10.64.74.2 for IP route RT_1:

uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /net/route -id RT_1 set -target 10.64.200.11 ‑netmask 255.255.255.0 -gateway 10.64.74.2 
Storage system address: 10.64.75.201
Storage system port: 443
HTTPS connection

ID = RT_1
Operation completed successfully.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\