Skip to main content

Dell Unity™ Family Unisphere® Command Line Interface User Guide

PDF

Change email alert settings

Change the current configuration for the alert "email to".

Format

/event/alert/conf/emailto { -id <value> | -addr <value> } set [ -newAddr <value> ] [ -severity { info | notice | warning | error | critical } ]

Object qualifier


Qualifier	Description
-id	Type the ID of the alert configuration you want to modify.
-addr	Type the address of the "email to" address for which you would like to change the alert email settings.

Action qualifier


Qualifier	Description
-newAddr	Type a new email address to send alerts to.
-severity	Type the new the minimum severity of alerts that will trigger emails. Valid values are: critical error warning notice info

Example

The following command changes the alert "email to" address to "stuff1@newmail.com" and specifies the severity level of alerts that will trigger the email is "info".

uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /event/alert/conf/emailto -addr stuff1@mail.com set -newAddr stuff1@newmail.com -severity info

Storage system address: 10.0.0.1
Storage system port: 443
HTTPS connection

ID = alertEmailConfig_1
Operation completed successfully.