Dell Unity™ Family Unisphere® Command Line Interface User Guide

View the configuration for a remote system on the local system. You can filter on the configuration ID of the remote system.

Format

Object qualifier

Example

The following command lists all configurations for remote storage systems:

Storage system address: 10.0.0.1
Storage system port: 443
HTTPS connection

1:    ID                   = RS_0
      Name                 = FNM00151702099
      Address              = 10.245.252.229
      Model                = Unity 300 (Local System)
      Serial number        = FNM00151702099
      Connection type      = async
      Source interfaces    = N/A
      Local interfaces     = N/A
      Remote interfaces    = N/A
      Operational status   = OK (0x2)
      Health state         = OK (5)
      Health details       = "Communication with the replication host is established. No action is required."
      Synchronous FC ports = spa_fc4, spb_fc4
      Bandwidth schedules  = MonTueWedThuFri7-18/2000,/8000
      Current bandwidth    = 8000


2:    ID                   = RS_1
      Name                 = FNM00151702100
      Address              = 10.244.205.127
      Model                = Unity 300
      Serial number        = FNM00151702100
      Connection type      = sync
      Source interfaces    = 10.245.252.231, 10.245.252.232
      Local interfaces     = 10.245.252.231, 10.245.252.232
      Remote interfaces    = 10.244.205.131, 10.244.205.132
      Operational status   = OK (0x2)
      Health state         = OK (5)
      Health details       = "Communication with the replication host is established. No action is required."
      Synchronous FC ports = spa_iom_0_fc0, spb_iom_0_fc0
      Bandwidth schedules  = N/A
      Current bandwidth    = N/A