Skip to main content

Dell Unity™ Family Unisphere® Command Line Interface User Guide

PDF

View iSCSI nodes

View details about iSCSI nodes. You can filter on the iSCSI node ID.

NOTE:The show action command explains how to change the output format.

Format

/net/iscsi/node [–id <value>] show

Object qualifier

Qualifier	Description
-id	Type the ID of an iSCSI node.

Example

The following command lists all iSCSI nodes on the system:

uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /net/iscsi/node show

Storage system address: 10.0.0.1
Storage system port: 443
HTTPS connection

1:     ID           = ISCSIN_1
       Alias        = MyISCSIserver1
       IQN          = iqn.1992-05.com.emc:fcnch0821001340000-1         
       Health state = OK (5)
       SP           = SPA
       Port         = eth0_SPA
       Interfaces   = IF_1,IF_2

2:     ID           = ISCSIN_2
       Name         = MyISCSIserver2
       IQN          = iqn.1992-05.com.emc:fcnch0821001340001-1          
       Health state = OK (5)
       SP           = SPA
       Port         = eth1_SPA
       Interfaces   = IF_3