Skip to main content

Dell Unity™ Family Unisphere® Command Line Interface User Guide

PDF

View host configurations

View details about a host configuration. You can select the ID of the host configuration or the host type.

NOTE:The show action command explains how to change the output format.

Format

/remote/host [{{-id <value> | -name <value>} | -type {host | subnet | netgroup}| -hostgroup <value> | -hostgroupName <value>}] show

Object qualifier

Qualifier	Description
-id	Specify the host ID.
-name	Specify the host name.
-type	Specifies the host type. Valid values are: host subnet netgroup
-hostgroup	Specifies the host group id to use as a filter.
-hostgroupName	Specifies the host group name to use as a filter.

Example

The following command lists all host configurations on the system:

uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /remote/host show

Storage system address: 10.0.0.1
Storage system port: 443
HTTPS connection
 
1:     ID              = 1014
       Name            = MyHost
       Description     = this is my host
       Tenant          = tenant_3
       Type            = host
       Address         = 10.64.74.10, 10.64.80.10
       Netmask         =
       OS type         = winxp
       Ignored address = 10.64.80.10
       Health state    = OK (5)

2:     ID              = 1015
       Name            = MySubnet
       Description     = this is my subnet
       Tenant          = 
       Type            = subnet
       Address         = 192.168.10.0
       Netmask         = 255.255.255.0
       OS type         =
       Ignored address =
       Health state    = OK (5)