Skip to main content

Dell Unity™ Family Unisphere® Command Line Interface User Guide

PDF

View alert history

View a detailed list of all system alerts. When a new alert comes in, those alerts older than seven days will be cleared..

Format

/event/alert/hist show [-state {Active_Manual | Active_Auto | Inactive | Active_Updating | All}] [-fromTime <value>] [-toTime <value>] [-limit <value>] [-acknowledged {yes | no}] [-severity {critical | error | warning | notice | info}] [-messageID <value>]

Action qualifiers

Qualifier	Description
-fromTime	Type the beginning of the time interval for which to display event records. The format is YYYY-MM-DD HH:MM:SS. NOTE:If you omit this qualifier, the list of logs that appears will begin with the first log.
-toTime	Type the end of the time interval for which to display event records. The format is YYYY-MM-DD HH:MM:SS. NOTE:If you omit this qualifier, the value is the current system time.
-limit	Type the maximum number of records to display. The value cannot exceed the default number 100.
-acknowledged	Type to specify a list of alerts that have or have not been acknowledged. Valid values are: yes no
-severity	Type the minimum severity level of the events to display. For example, if you type critical, records for the alert and emergency severities will also appear.
-state	Specify the state of the alerts that you want to display. If this option is not specified, only active alerts will be displayed. Valid values are: Active_Auto - Displays all active alerts that will be automatically cleared once resolved. Active_Manual - Displays all active alerts that must be manually cleared using the /event/alert/hist deactivate command once resolved. Inactive - Displays all resolved or deactivated alerts. Active_Updating - Displays all alerts transitioning between states. All - Displays all active and inactive alerts.
-messageID	Specify the alert message ID that you want to display. If this option is not specified, all alerts will be displayed.

Example

uemcli uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /event/alert/hist show -state Active_Manual -limit 2 -fromTime "2009-11-09 19:43:08" -severity info -messageID 14:38000c

1:    ID           = alert_6
      Time         = 2019-06-26 07:09:42.100
      Message ID   = 14:38000c
      Message      = Invalid messaged ID supplied.
      Description  = "There are one or more new technical advisories available for viewing on the Technical Advisories page."
      Severity     = error
      Acknowledged = no
      State        = Active_Manual(unsolved and need manually marked as inactive after been solved)
      Duplications = 0

2:    ID           = alert_3
      Time         = 2019-06-26 06:40:15.837
      Message ID   = 14:38000c
      Message      = There are new advisories available for viewing on the Technical Advisories page.
      Description  = "There are one or more new technical advisories available for viewing on the Technical Advisories page."
      Severity     = notice
      Acknowledged = no
      State        = Active_Manual(unsolved and need manually marked as inactive after been solved)
      Duplications = 2