Skip to main content

Dell Unity™ Family Unisphere® Command Line Interface User Guide

PDF

View NAS routes

View a list of routes for a specified NAS interface or for all NAS interfaces on the system.

NOTE:The show action command explains how to change the output format.

Format

/net/nas/route [{-id <value> | -server <value> [-useForESAccess {yes | no}] | -if <value>}] show

Object qualifiers

Qualifier	Description
-id	Specify the ID of the route.
-server	Specify the NAS server for which to view routes.
-useForESAccess	Indicate whether you want the system to display only the routes that are used for external services.
-if	Indicate whether you want the system to display only the routes associated with the specified NAS server.

Example

The following command displays all NAS routes on the system:

uemcli -d 10.0.0.1 -u Local/joe -p MyPassword456! /net/nas/route show -detail

Storage system address: 10.0.0.1
Storage system port: 443
HTTPS connection

1:    ID                               = route_1
      NAS server                       = nas_1
      Type                             = net
      Target                           = 10.50.50.10
      Netmask                          = 255.255.255.0
      Gateway                          = 10.0.0.1
      Interface                        = if_1
      Health state                     = OK (5)
      Health details                   = "The component is operating normally. action is required."
      Replication sync                 = 
      Use for external services access = no
	

2:    ID                               = route_2
      NAS server                       = nas_1
      Type                             = default
      Target                           =
      Netmask                          =
      Gateway                          = 10.0.0.2
      Interface                        = if_2
      Health state                     = OK (5)
      Health details                   = "The component is operating normally. No action is required."
      Replication sync                 = 
      Use for external services access = no

3:    ID                               = route_3
      NAS server                       = nas_1
      Type                             = host
      Target                           = 10.50.50.168
      Netmask                          =
      Gateway                          = 10.0.0.3
      Interface                        = if_3
      Health state                     = OK (5)
      Health details                   = "The component is operating normally. No action is required."
      Replication sync                 = 
      Use for external services access = yes